machine screwsの例文

• The extended grip is attached via four ( 4 ) machine screws.
• Most types are designed for either machine screws or sheet metal screws.
• Once in place a machine screw is inserted into the center and tightened.
• Machine screws and setscrews are like bolts in that they have threaded shafts.
• Why machine screw cannot be used for wood application?
• The legs are then attached to the cabinet bottom by a slotted, hollow machine screw.
• The fasteners are similar to flat-head machine screws.
• You can drive machine screws into plastic, but you must first cut threads into the material.
• Typical fasteners are T-nuts and pan-head machine screws.
• Machine screws usually have round slotted heads.
• The company was acquired by Hartford / Standard Machine Screw Company in 1970 and operated as a subsidiary.
• It may be expressed in fractions of an inch or a whole number that corresponds to machine screw gauges.
• The company added additional subsidiaries throughout the early part of the century including Hartford Machine Screw and Western Automatic.
• The number series of machine screws once included more odd numbers and went up to # 16 or more.
• It thus works well for parts such as machine screws, with rotational symmetry and a clear asymmetry to one heavy end.
• Soon Hartford Machine Screw outgrew its quarters and built a new factory adjacent to Weed, where it would remain until 1948.
• The ideal method is to clamp the book between two thick boards using heavy machine screws to provide the clamping force.
• The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil.
• Most bolts fall into the categories of machine bolts, stove bolts, carriage bolts, machine screws, set screws, specialty bolts and threaded rods.
• A machine screw is then screwed into the sleeve, causing the anchor to bend, expand, spread and grip against the inside of the drywall.